look what i GOT TODAY > pic on page FOUR !!
5068 views
69 replies
39 following
K
look what i GOT TODAY > pic on page FOUR !!
lucky_brew
+1y
Edited: 3/7/2008 3:53:40 PM by lucky_brew
well, the porsche wheels were on major backorder so i bought something else instead > pic on page 2 Edited: 3/3/2008 7:52:51 PM by lucky_brew
know anyone that will polish them? oh and what do you think about changing lug patterns? adapters or redrill hubs? these are porsche lug pattern 5x130 and mine is 5x114.3!
well, the porsche wheels were on major backorder so i bought something else instead > pic on page 2 Edited: 3/3/2008 7:52:51 PM by lucky_brew
know anyone that will polish them? oh and what do you think about changing lug patterns? adapters or redrill hubs? these are porsche lug pattern 5x130 and mine is 5x114.3!
slammedcivicsi
+1y
re-drill your hubs. Any reputable machine shop should do it for about $100 an axle.
lucky_brew
+1y
Edited: 2/27/2008 10:53:54 PM by lucky_brew
Size: 16x7" Offset: 23.3mm Bolt Pattern: 5 x 5.12 or 5 x 130
Size: 16x7" Offset: 23.3mm Bolt Pattern: 5 x 5.12 or 5 x 130
lucky_brew
+1y
Originally posted by slammedcivicsi
re-drill your hubs. Any reputable machine shop should do it for about $100 an axle.
i can probably get it done a bit cheaper. im just keeping my options open. i ran adapters for years and never had issues but it changes the offset/backspacing and sometimes makes them more difficult to tuck
btw: what do you think of them?
re-drill your hubs. Any reputable machine shop should do it for about $100 an axle.
i can probably get it done a bit cheaper. im just keeping my options open. i ran adapters for years and never had issues but it changes the offset/backspacing and sometimes makes them more difficult to tuck
btw: what do you think of them?
sirbodydragger
+1y
chris get john(laynrockers) to redrill your stuff & the bolt pattern is most lokely 5x112, those are cool as hell,there used to be a guy that did/does work for hunters polishing wheels. you might give them a shout & see if the know who it is & if he still does it
what size tire you gonna run ? 215/40-16?
what size tire you gonna run ? 215/40-16?
lucky_brew
+1y
Originally posted by sirbodydragger
chris get john(laynrockers) to redrill your stuff & the bolt pattern is most lokely 5x112, those are cool as hell,there used to be a guy that did/does work for hunters polishing wheels. you might give them a shout & see if the know who it is & if he still does it
what size tire you gonna run ? 215/40-16?
cool. ill give hunters a call in the am. i just pmd john. where is he located? this is the bolt pattern i copied from their website: Bolt Pattern: 5 x 5.12 / 5 x 130
chris get john(laynrockers) to redrill your stuff & the bolt pattern is most lokely 5x112, those are cool as hell,there used to be a guy that did/does work for hunters polishing wheels. you might give them a shout & see if the know who it is & if he still does it
what size tire you gonna run ? 215/40-16?
cool. ill give hunters a call in the am. i just pmd john. where is he located? this is the bolt pattern i copied from their website: Bolt Pattern: 5 x 5.12 / 5 x 130
lucky_brew
+1y
and yeah - 215/40/16 , 205/45/16 or 205/40/16 - just depends!
sirbodydragger
+1y
johns in knoxville i think. i just had a brain fart 5x112 is mercedes so yeh 5x130 would be porsche
lucky_brew
+1y
cool i could drive them and save shipping... thanks man! you still up for the hunters show?
greenranger 23
+1y
didn't the v-dub guys put them on all there bugs