K
2 link pictures
sadisticiron
+1y
1.5 inch tubing and the way CA cops are they cant bitch about it being unsafe
able to tow a trailer if the motor and trans would keep up
able to tow a trailer if the motor and trans would keep up
dssur
+1y
Originally posted by sadisticiron
able to tow a trailer if the motor and trans would keep up
haha yeah mazdas are the snail of minis. Mine is hopped up a little and I think even a Yugo with a miss would beat me in a stoplight race.
able to tow a trailer if the motor and trans would keep up
haha yeah mazdas are the snail of minis. Mine is hopped up a little and I think even a Yugo with a miss would beat me in a stoplight race.
JETSETTER
+1y
Not directed at you Russ, but, I do go back to 1987 with a Nissan 720 riding 2" off the ground. Beat you to death. Like I said early, There are BETTER ways to do things these days! Sadistic has some bad azz shit going on with the Mazda's he's cranking out. Russ, that Mazda was Sweet!
bdroppeddak
+1y
Originally posted by Russ-D
Originally posted by sadisticiron
able to tow a trailer if the motor and trans would keep up
haha yeah mazdas are the snail of minis. Mine is hopped up a little and I think even a Yugo with a miss would beat me in a stoplight race.
russ you must have forgot to add the crystals in your time machine motor!!
Originally posted by sadisticiron
able to tow a trailer if the motor and trans would keep up
haha yeah mazdas are the snail of minis. Mine is hopped up a little and I think even a Yugo with a miss would beat me in a stoplight race.
russ you must have forgot to add the crystals in your time machine motor!!
dssur
+1y
Originally posted by bdroppeddak
russ you must have forgot to add the crystals in your time machine motor!!
haha it feels like going back in time when evryone is PASSING YOU. Luckily my Mr Fusion uses common trash to generate the 1.21 gigawatts I need to power the flux capacitor.
russ you must have forgot to add the crystals in your time machine motor!!
haha it feels like going back in time when evryone is PASSING YOU. Luckily my Mr Fusion uses common trash to generate the 1.21 gigawatts I need to power the flux capacitor.
Deuce
+1y
mono leafs are the thing of the future, bow down to russ d the fuckin guru....
dssur
+1y
Originally posted by laync10
mono leafs are the thing of the future, bow down to russ d the fuckin guru....
There ya go, turn that frowm upside down, sounds like we are friends again!
I for one am relieved.
mono leafs are the thing of the future, bow down to russ d the fuckin guru....
There ya go, turn that frowm upside down, sounds like we are friends again!
I for one am relieved.
balcar
+1y
Edited: 9/4/2005 7:40:09 PM by havok
i've done a few 2 links and just won't do them anymore. They ride well, its just not the "right" way to do it. I've seen 2 many of them break, esp on the 1-ton trucks. If done right, you won't have any problems, (for the most part) but its not technally for the u joints and such. It does cause extra vibration when lifted all the way or down all the way depending on how its set. 4-links allow your ujoints to be parrallel and cancel out the natural vibration that happens in your u joints. If someone wants a 2-link i send them elsewhere now days. Here is a 4-link I did using grvity werx 4-link. Its since been redone to a custom cantilever style, but the mounting places are the same.
i've done a few 2 links and just won't do them anymore. They ride well, its just not the "right" way to do it. I've seen 2 many of them break, esp on the 1-ton trucks. If done right, you won't have any problems, (for the most part) but its not technally for the u joints and such. It does cause extra vibration when lifted all the way or down all the way depending on how its set. 4-links allow your ujoints to be parrallel and cancel out the natural vibration that happens in your u joints. If someone wants a 2-link i send them elsewhere now days. Here is a 4-link I did using grvity werx 4-link. Its since been redone to a custom cantilever style, but the mounting places are the same.
balcar
+1y
sadistic-how is your side2side on that 3 link setup? I've seen some 4x4s using the same style setup, but they are using heigm joints. Looks good though
sadisticiron
+1y
i do side to side set ups by putting heims at the rear end of the links works great for a non body drop truck. trucks that are b/d the side to side is so much the rockers will cave in heres a pic of the rear end done as u can see everything is hidden shocks,tanks, comps
