Guess what

A header is the least of my concerns at the moment. Fixing the exhaust is a priority because it's got a pretty bad leak and a lumpy idle, as well as running pretty rich. I need a set of door mirrors, and both trucks have a tail light out which needs to be fixed before Will and I get popped for them.

oh, everyone likes pics. Took some when I got it home tonight

Yeah, it's got a hemi.

nice man!! truck looks great!!

A little bit of progress today. We started to lower the red one. Picked up a set of 3" blocks, and we took out 2 leaf springs. I swapped the wheels over from the black truck, so now I've got the lower pro tires and aluminum rims. Tomorrow we're going to crank down the front and reindex the bars. Started to get the headunit installed and the chrome bumper will be swapped. I redded out the tails today and swapped over to the chrome tail light trim as well.

On the black truck, we got some Toyota rims and 195/55/15 tires. It's damn low now and got stuck on my driveway curb lol.

Here's a few pics from today.

That's all you got done?!? lol Less beer, more workey!!!!!!! LOL

got some more info on shocks, I'll try to get some prices in the morning

sweeeet.

we have to get my truck done and then do the black truck. Will left the black one here tonight because the rear end is so loose.

yeah well we didnt start til like 6...we started to put the rear back together but the washers for the leaf spring pin was too big and wont fit through the shock plate, so they need to be drilled out tomorrow. After they are drilled and my torsions are cranked, mine's on the ground and done.

We actually got quite a bit done considering the amount of beer that was consumed. And eating an entire Little Ceasars pizza didn't help the motivation any lol

Good Call

it'll be fixed for sure. we busted out the new compressor today and it works pretty good.

chippewa custom show trucks ehhh LOL