sclade wheels...

i found a set but was wondering if they will bolt up? Do i have to drill the center bore out? Tons or just a bit?

thanks duders...

Yah they'll bolt up but you either need to have the centers machined or grind down the tabs on the hubs.

dont be janky get the center bored, they need to be bored out to 3.75" a decent machine shop wont cost you more than $100 to do it

i grinded the tabs easier cheaper and doesnt hurt anything

gind down the tabs on the rear drum housing, and bolt them on.... quick, easy, no cost (unless you don't have a grinder)

mine are grinded down and have no problems at all just make sure and get the bulge seat lugnuts.




-justin

again thanks, so the fronts will bolt up, just the rears are whats needed to mod?


i think ima get em

i guess im just not into short cuts..guys on this site also flip their ball joints and use original hardware to bolt them back together..does it work...yeah, will you have problems..maybe....but why chance it...those tabs are there for a reason..but if shortcuts work for you....go for it

my esskies been on my truck for 3 yrs now with no problems...

I took a grinder to my tabs on my truck and no problems at all... running 16 yukon rims right now..