My dent

2800 views
16 replies
11 following
K
My dent
midnightmike avatar
midnightmike
+1y
why not use and old door? and use most of it and smack the edges back

i replaced the quarter panels on my 4runner useing toyota pick box sides
hex0rz avatar
hex0rz
+1y
That area is work hardened way too much... You are going to have a hell of a time DIY'ing it. If you have a buddy with a morganokker then you MIGHT stand a chance! Its such a tight area that its hard to work...

You will be better off doing a panel replacement! No sense in wastign your money to fix it when you should be using it to buy a panel!

If you buy a panel and have the tools, lets us know, we could help walk you through!
mazdamandan avatar
mazdamandan
+1y
I would cut it out a bit higher than the body line, go to a scrap yard cut out a good donor piece if can find one, and weld her in thats too much warpage to fix w/o cuttin and welding IMO
This is providing ya have a cordless saw and welder, and cut more off the donor than ya need, you can always trim later
badassmini avatar
badassmini
+1y
theres one on ebay theres selling heres a link
badassmini avatar
badassmini
+1y
sudkrap avatar
sudkrap
+1y
Nice find on ebay, i might pick that up.. I would go the bone yard, but no joke, every mazda xcab has the same dent, there are atleast 4 at the nearest junk yard, all with the same dent.. lol thanks again
v8mazda4ever avatar
v8mazda4ever
+1y
I would go with that for sure badassmini has the right Idea buy that skin sudkrap don't waste time trying to fix it.