crossmembers hitting

hey guys trying to lay my front out

either my front body mounts (behind wheels) engine crossmember, or the one under the first uni joint on the tailshaft hits before my chassis rails

anyone else had this problem as i was lead to believe nothing got in the way of mazda rails?

Just drag'em off

Mine there was nothing in the way on the rails.Till I put a fuel pump and header on.Yours shouldn't have anything in its way.Pics would help.

is the back bagged because the front isnt goin to lay frame without the back bagged. if its only the front the crossmember is gonna lay before the actual frame does.






-justin

only pic i got


rails are like 5mm off at the front, on the ground at the rear

Is the engine crossmember laying? It sticks down like a 1/2" more than the rest of the frame so thats why the front of the rails doesnt quite lay out.

what do you do with it? trim 1/2" off it?

Is the truck back together? If so, "trim" it off with a giant asphault grinder.

yeah mine hits so i just bodyrdoped over what i could'nt cutoff

yeh i used that asphault grinder kaoss is talkin about. worked great and its really fun to use.






-justin