Bag set up need advice

OK here is what i want . All I want to do is raise the truck up so I can drive and slam it when its parked, no FBSS stuff just very basic. Should I just used blocks in the rear and notch the fram and put bags and shocks or go with a for link bags and shocks.
Second question how should I do the front .
Thrid a final questions. What all parts would I need to set this up right?

Well a link setup is always recomended for a rear setup. You can use your factory leaf springs but unless you get them dearched or something else extreme the rear end will not lay out... and i would at the very least get a 3 link. As for the front you need the torsion kit sold by the many different companys that supply the mini truckin industry. So a rear setup, 3 or 4 link, torsion kit, and a basic bag kit (not including miscelanious metal and crap that you need for the install).
Mike

What exactly comes with a front torsion kit.......and wheres the best place to get a kit...
Justin

You've got many choices, and companys to choose from!

suicide doors.com gravity werks make your own

the upper bag mounts, with 2 gussets to brace it, and your lower circle plates and such, i can get them for $53