does any one see ne thing wrong with this

ps... yall ever seen any valves this big...ha ha ha!

Are they your up or down vavles????

yup!

the 3/4s r down but im gonna regulate them for now

bout yer rear bag setup, i did the same thing, and you gonna need a bar welded or bolted in between the 2 link bars, cause the bags being on the side puts a side load on the bar and will stress your bushings and ubolts a lot...just a heads up, like when you lift the truck up, you will see your 2link bar cocked to the side

and before you get everything all setup, re-drill a hole on the stock leaf perche s, there is a spot at the very top and very back of the leaf perch where you can drill a hole and the bar ends will still move w/o rubbing the frame, and it will be about 1/4-1/2inch above the frame when you lay out, so you dont drag it off, and make sure to re-inforce them on the side because if you re-drill, there will be less metal around the hole on that part of the mounts

oc i wanna gonna say ur gonna be railing the ground, mine bottoms out hard on 1/2..lol...

yeah...you may not see it in the pics..but i got a 2x2 all the way across the back...welded and gusseted...and about the leaf pearches...im gonna be mounting some 1/2inch drag plates to the framethis 2 link is not permanent, i will be 4linking next winter

k coo