BYC Arms?

6033 views
39 replies
14 following
K
BYC Arms?
mullet avatar
mullet
+1y
mike.. if it makes things easier, you can email me the pics at and i will be more than happy to post some pics up on the different sites for you. And i will look into the pic of the front arm w/out the bag.. i know i got some pics when i recently bagged my truck.. but not sure if the bag is in the way or what.
builtbybyc avatar
builtbybyc
+1y
cool, thanks
grantkustoms avatar
grantkustoms
+1y
Our metal prices have not gone up as bad because we use sheets not tubing
Matt
balcar avatar
balcar
+1y
I will have the tech article up on my forum hopefully by the end of the week on the BYC arms. Had to put the truck together for a show, and just started back on it a few days ago. I built a tool to take out the lower bushings (which made it pretty easy). I have posted a few pics of the control arms on the web site allready if you want to check them out.
its the 3rd or 4th truck down.
builtbybyc avatar
builtbybyc
+1y
show me the tool Phil, I have lots of trouble in the shop installing and removing bushings when Im prototyping.
mullet avatar
mullet
+1y
when i click on "control arms" to see the pics it pops up that this page cannot be displayed. ????
Mike
slammedmini469 avatar
slammedmini469
+1y


same here
balcar avatar
balcar
+1y
crap, i'll work on it tonight when I get home
builtbybyc avatar
builtbybyc
+1y
thanks phil for the tech article. hopefully any issues you ran into during installation can be relayed back to me so I know what I may need to change. looks like we need to change the upper crossbar just a little to accomodate the angled mounting point on the Mazda frame.

Im also moving the bag mount forward as much as possible for brake caliper clearance. let me know if anything else needs to be changed.
balcar avatar
balcar
+1y


Here it is! i'll email ya also mike...