You could, but i would make a standard 3 link.. if your going to buy the metal might as well get the 7 4 link ends and run the top bars to one end.. locate it in the center and almost run it exactly like a 4 link.. that way you get your support and CRAZY doglegg.
Mike
M
mpenner49
+1y
Anyone have a website or pics of a standard 3 link? OR a website that sells cheap 3,4,or 2 link kits?
M
mark
+1y
cheap=death
go to suicidedoors.com or gravity-werx.com
dont be using stop sign angle iron for your bridge crossmembers
if you build your own stuff with the right metal, it wont cost you more than 150bones
if you buy it, it'll run around 250-350
try those 2 sites, their stuff are beefy, and will sure as hell hold all 86 ground pounding horsepower our mazda motors put out lol
M
mullet
+1y
yeah they are defenatly over kill for what we need.. but u don't want to go cheap. If you have a local metal store get 1 1/2in OD round tubing but make sure its about 1/4in thick.. and if you go square 2x3x1/4 is the cheapest box tubing i have found.. and easiest to work with.
Mike
M
mpenner49
+1y
Anyone individual in here make a kit? Anyone make a home-brew kit they sell cheap?
M
mpenner49
+1y
Anyone sell a kit?!?!
Or anyone have plans or detailed intructions to build?
M
mpenner49
+1y
How much bro?
S
slammed89mazda
+1y
id go 2 suicidedoors.com, nothing against custombiz, but SD is the best around
M
mullet
+1y
true.. but a lot of their metal is over kill.. i have made cheap kits and have done complete air ride setups in 1 day.. by purchasing the bare necessities... with plans to fix and upgrade it later. i found this to be more trouble than its worth.. just do it right the first time.
P
pt_mazda
+1y
I've got a 3-link on my truck...
<img src="">
but i guess i dont know how to post pics on this site...hah