Question about air shocks?

2784 views
19 replies
10 following
K
Question about air shocks?
mark avatar
mark
+1y
lemme look for one for u bro
mpenner49 avatar
mpenner49
+1y
Cool thanks! I just want to runa basic set up but still have it work good and looks good too!! Any one brand of air shocks better? Or can you use like airshocks off another vehicle like a caddy or something?
mpenner49 avatar
mpenner49
+1y
Did any of the brotherens of this fine society find a diagram?
mullet avatar
mullet
+1y
I have a simple one for bags.. i don't know if it would help you much.. but here it is.

juiced avatar
juiced
+1y
here's a link to another forum where they're discussing the same thing you wanna do.

delawaredime avatar
delawaredime
+1y
i did it on my s10. out of one of the ports on my tank i went to my valves and then to the shocks, i have toxic shock air shocks which i hooked half inch line up to and they got up pretty quick. i was happy as hell with them.
hybrid avatar
hybrid
+1y
i also ran the back of my mazda on air shocks b/f i got juice.i drilled the pressure out of the shock,ported the fitting and ran 1/2 everything with a 4 port tank.at 250 psi i could hop it and it rode stiffer than hydro's locked up with no springs.i just used the generic mazda air shocks.make sure the air fitting is straight out and not 90 degree.
87mazdamini avatar
87mazdamini
+1y
I have 3" blocks and I am planning on pulling 2 leafs and installing airshocks for right now. Should I use 6 degree angle shims with my blocks or should I be ok without them?
fanninator avatar
fanninator
+1y
can anybody tell me how much the price range runs for one of them and some brands that makem. links if ya gotem also. thanks - fanninator
hybrid avatar
hybrid
+1y
i could hop my mazda on shocks in the back before i switched to juice.i ran normal mazda air shocks,then i drilled the compression out of the shock section then honed the air fitting till the walls were razor then.5 gal. tank (4) 1/2" valves and 1/2" air line with the a/c comp. converted over to the compressor.and at 250psi it definatly launched of the ground.you can PM me if any one has more questions