Rebuild or Swap?
box rod
+1y
My 93 2600i is going to need a rebuild soon...but I have found a 2.0 (engine and 5 speed tranny) that has only 23,000 miles on it since it was rebuilt. It already has the weber carb and pacesetter header.
I would be switching from FI to Carb and from Auto to Manual. So should I rebuild the 2.6 or put the 2.0 in? Thanks in advanced...
I would be switching from FI to Carb and from Auto to Manual. So should I rebuild the 2.6 or put the 2.0 in? Thanks in advanced...
slammedyota91
+1y
rebuild, its less power than you 2.6 also a pain to swap auto to manual, i would rebuild
pont
+1y
rebuild if it was a 2200 or a 2000 then i would swap but the 2600 is complete different drive train
P
pepehn
+1y
what about a Mitsubishi Starion 4G54 Turbo Motor..will it bolt up to the 2600 bellhousing? I know its basically the same motor?
P
pepehn
+1y
...psssHHTTTT
H
hocbj23
+1y
mitsu starion,conquest TSi,Dodge D-50 2.6 truck,even some of the k Chrysler cars and vans with 2.6 l motors are all that same Mitsu 2.6 and will all bolt up to the 87-88 Maz B2600 (not the 2600i) tranny.2600i was a MAz motor.bj
M
mazdatweaker
+1y
post deleted
Post was last edited on May 14, 2009 06:37. Edited 2
times.
box rod
+1y
I'm out in the West Side of Atlanta...Douglasville.
By the way - Thanks for all of the responses and help/info. Looks like I am going to rebuild the 2.6 FI engine.
M
mazdatweaker
+1y
post deleted
Post was last edited on May 14, 2009 06:36. Edited 1
time.
![90-b22dawg [andrew]'s avatar](https://static.streetsource.com/userphotos/2014/328/16283/s.jpg)
90-b22dawg [andrew]
+1y
im on the south side of atlanta.... as soon as i get another vehicle to drive im dropin the 2.2l and tranny and rear end.... nothing special done to it... going to rebuild the top end and sell......
Related Discussions in Mazda Engine General
Thread
Posts
Last Post
