BEST WAY TO DROP STOCK MAZDA???

well i put 16s on my truck and they rubbed the inside of the rims. i learned from trying lol. im talking about the AIM/airbagit.com spindles

if you do the balljount flip only a 17 will fit, 16's if not....15's will rub

please turn off your caps lock

also find the post about the lowest static drop (there are 2 similar posts) and find the drop/look you like. if you like the drop on my truck you can search my posts. I've mentioned everything I've done in several posts

i got my spindles in today they did just rubbed but with the flip bj and a little of grindin they worked out great

the bolts on my torsions broke so im ridin bump stops in the front for now till i can get my hands on the hardware, and i pulled the middle leafs out and 3" blocks with no bump stops. its low but not low enough. i will pull the bumpstops out the front and reindex the torsions to go lower and i will not mention the rear cuz most if not all on the forum do not think it is save. but it will ahve a small cnotch. but turn down the torsions, blocks and mono leaf/

leave 2 leaves in the rear and go to 4" block once you get the notch. you will also need to cutout or raise your front inner fenders if you go lower than me. I rub mine on bumps now and I have stiff doetsch tech shocks