S10 build up for kid with Epilepsy

looks good nice and simple

looks clean.i can only imagine how happy he's gonna be when he gets his first look at it laid out.

Sexy welds!

Nice use of zip ties!

awesome work...cant wait to see it done

nice work very nice welds!

wow, those welds give me a stiffy. you're doing a great thing! awesome work

good work man!

Thanks guys.   Got the Panhard bar built and cycled the suspension. The closes the bolt on the upper link gets to the bag is about 1/2" when it's fully compressed. It's a little close for me, so I am going to swap the bushing out for a rod end with misalignments, and I will be able to move the bar over about an inch.In the second picture you can see the bar is installed level at ride height. It may look unlevel, but it is because the panhard bar is angled back, and is further away from the axle on the DS. But I measured many times to make sure. It's also installed to put the roll center height right around the bottom of the pumpkin. A little bit lower than stock.

seth, quick question for you! whats the point of the top link bar?