K
2link pros and cons
dante81_98
+1y
Originally posted by aaronhebert88
go ask around on full size chevy, everyone there swears by 2-links.
It is quite the oposite actually. There are a couple of guys over there that run them but most people are against them. The problem is that it has been beated to death so much that people don't even respond anymore.
LaterChad
go ask around on full size chevy, everyone there swears by 2-links.
It is quite the oposite actually. There are a couple of guys over there that run them but most people are against them. The problem is that it has been beated to death so much that people don't even respond anymore.
LaterChad
johnz
+1y
ok what if the 2 link bars are not straight like the ones u use in the example kinda like a hockey stick but with a hell of alot less of an angle at the end
daneisuzu91
+1y
we run 2-link bars that were 42" long on my friends 99 taco and crossed it out with another link not a panhard bar,and put 2600 bags 13"from the front and we got 23" of lift with only a 1/4 of an inch of side to side travel. its not about being cheap it's about lift and personal preferance.run what you like..
Master Fabber
+1y
The shape does not matter. It is the point that one end pivots and the other is fixed so the rear travels in a fixed arc. As stated above, physically impossible to have no pinion movement. I hear the way to go these days is reverse 2 link?
daneisuzu91
+1y
reverse travels away from the trans. and can possably pull the drive shaft out of the tranny
mindlissmetalfab
+1y
Originally posted by Master Fabber
The shape does not matter. It is the point that one end pivots and the other is fixed so the rear travels in a fixed arc. As stated above, physically impossible to have no pinion movement. I hear the way to go these days is reverse 2 link?
Damn I wanted to make a new video with a retardedley shaped link bar.
The shape does not matter. It is the point that one end pivots and the other is fixed so the rear travels in a fixed arc. As stated above, physically impossible to have no pinion movement. I hear the way to go these days is reverse 2 link?
Damn I wanted to make a new video with a retardedley shaped link bar.
Master Fabber
+1y
I was joking about the reverse 2 link it would be the absolute worst thing you could do. I was not aware someone would think I was serious so I apologize.
FreelandKustomz
+1y
2 links are great for people WITH OUT air suspension
mindlissmetalfab
+1y
Originally posted by Master Fabber
I was joking about the reverse 2 link it would be the absolute worst thing you could do.
Oh really? Cuz my plan was to cut my leaf springs in front of my axle and use the rear half of the spring pack and just mount some airshocks back there somewhere. hahaha.
Yes I'm also joking so Johnny Backyard please put down the sawzall.
I was joking about the reverse 2 link it would be the absolute worst thing you could do.
Oh really? Cuz my plan was to cut my leaf springs in front of my axle and use the rear half of the spring pack and just mount some airshocks back there somewhere. hahaha.
Yes I'm also joking so Johnny Backyard please put down the sawzall.
TwistedPhil
+1y
That is the best video I've seen all day! Thanks for the repost- I'll have to bookmark that thing to show customers when they ask what to run!