K
Frame Table....
BioMax
+1y
All of these frame rack designs would work well, but if you need something that can be disassembled (like I do)...
I took (2) 18' 4" x 8" .250 wall I-beams and welded hitch reciever material across and down. The I used 2"x 2"x .188 to connect the beams across. The legs have castors and are adjustable with bolts to lock everything down once leveled out. How everything is adjusted and locked down, could be done anyway you want, but the basic idea is there. It works well and can be stored in the corner of the shop or where ever. I'm sorry the picture is so grainy, I don't have anything better.
I took (2) 18' 4" x 8" .250 wall I-beams and welded hitch reciever material across and down. The I used 2"x 2"x .188 to connect the beams across. The legs have castors and are adjustable with bolts to lock everything down once leveled out. How everything is adjusted and locked down, could be done anyway you want, but the basic idea is there. It works well and can be stored in the corner of the shop or where ever. I'm sorry the picture is so grainy, I don't have anything better.
impulse
+1y
Originally posted by iLLblazer
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
granth
+1y
Max, can you take a pic farther away so I can see the cross beams? I like how its using the hitch to use wheels and all.
bill brasky
+1y
Corey did you build yours out of angle and what size?
I could build something like that for about 25$
I could build something like that for about 25$
granth
+1y
It looks like a good bit of it is angle....maybe just a couple cross-braces and legs are full tube?
granth
+1y
would it be okay to weld the table up with flux core? I don't have my gas yet, but I am getting to the point of buying the cross member and building the table, and I could get started if it would be strong enough. I personally think it will be strong enough, but what do you guys think?
bodydropped85
+1y
it should be.
bdroppeddak
+1y
Originally posted by iLLairgasm
Originally posted by iLLblazer
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
you guys ever noticed how angle has a natural curve to it?
Originally posted by iLLblazer
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
you guys ever noticed how angle has a natural curve to it?
mindlissmetalfab
+1y
Originally posted by iLLairgasm
Originally posted by iLLblazer
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
Re-Read your first post. Pretty sure it says heres the one I built, not WE. Yeah its just a frame table. So whatever. I wasnt taking credit for it. We did build it together, which isnt what your post would lead anyone to believe. I wouldnt want to embarass you on SSM though. Obviously that touched a nerve.
Originally posted by iLLblazer
Originally posted by iLLairgasm
Edited: 2/4/2007 11:35:10 AM by iLLairgasm
Edited: 2/4/2007 11:34:25 AM by iLLairgasm
Here's the one I built...
Was that before or after I drew it up in CAD, made a cut list, and tacked it together?
Want a fuckin award? or a cake? which will it be? Last i re-call we worked on it together. But hey... go ahead and take credit for it.. its just a frame table...faggot.
Re-Read your first post. Pretty sure it says heres the one I built, not WE. Yeah its just a frame table. So whatever. I wasnt taking credit for it. We did build it together, which isnt what your post would lead anyone to believe. I wouldnt want to embarass you on SSM though. Obviously that touched a nerve.
impulse
+1y
lol... retard... who cares.
Wouldn't want you to not get any credit for it.
Wouldn't want you to not get any credit for it.