how too seal rollpan

wuts they best way too seal off and preven rust and all on backside of rollpan???

Edited: 2/1/2007 8:58:16 PM by sadexcuse4s10

maybe primer and spray paint the backside after you weld it on?

seems like common sense to me

also a good idea to hit the backside of it with some rockerguard. it'll absorb a bit of impact from road debris instead of chipping like paint will.

i put some rust paint like por or tremclad and then cover it with rock guard works like a hot dam

epoxy primer on baresteal always

^ bingo! epoxy primer. then undercoating or por 15

epoxy prime it, seam seal the edges, then undercoat it, or rockerguard it, and a final coat of rustoleum or tremclad is fine for a driver....if you want show then use paintable rockerguard and cover the with colour match base clear paint.

Originally posted by Wicked Fantacies



^ bingo! epoxy primer. then undercoating or por 15

Por 15 goes directly on bare metal. It will peel off of anything else. Try it and stick some masking tape on it, you'll see what I mean.

You caught me seth! I didn't catch it till I posted

whatever you end up putting on it..make sure it can withstand rocks and other road debris hitting it..otherwise you will end up getting a bunch of tiny "uppies" in the outside of your rollpan or skin