K
Square tube control arms
plugee
+1y
What are they under in the speedway website?
stockflooredsdime
+1y
Street Rod Products:
-Rod Ends & Tie Rods
Racing Products:
-Control Arms, then Ball Joints
-Rod Ends & Tie Rods
Racing Products:
-Control Arms, then Ball Joints
dubrocker04
+1y
Originally posted by bdroppeddak
Originally posted by dubrocker04
what's the wall thickness on the tubing? not too sure i'd want anything but DOM on such a vital component...
ihave yet to see an automobile manufacturer use dom tubing for control arms in a mass produced automobile
well it's a good thing we aren't talking mass production then, right? just because it looks good doesn't mean it works good. i'm not knocking the guy's work, i'm asking the thickness of what he's working with.
Originally posted by dubrocker04
what's the wall thickness on the tubing? not too sure i'd want anything but DOM on such a vital component...
ihave yet to see an automobile manufacturer use dom tubing for control arms in a mass produced automobile
well it's a good thing we aren't talking mass production then, right? just because it looks good doesn't mean it works good. i'm not knocking the guy's work, i'm asking the thickness of what he's working with.
laynwindows
+1y
i'll give you credit on how they look, cause they do look real good, but they dont seem too practical, i woulda thought about bag placement before i started that. seems to me kinda like a chop top without glass
stockflooredsdime
+1y
Originally posted by laynwindows
i'll give you credit on how they look, cause they do look real good, but they dont seem too practical, i woulda thought about bag placement before i started that. seems to me kinda like a chop top without glass
The original design has the bags mounted outside of the control arms, however, I am not going to completely rule out placing them in a more traditional location (or should I say "practical") if it is applicable.
i'll give you credit on how they look, cause they do look real good, but they dont seem too practical, i woulda thought about bag placement before i started that. seems to me kinda like a chop top without glass
The original design has the bags mounted outside of the control arms, however, I am not going to completely rule out placing them in a more traditional location (or should I say "practical") if it is applicable.
nathansmc
+1y
Originally posted by dubrocker04
Originally posted by DATSLO
they are going to have some crazy ass camber!!!!
wtf? looks like next to no camber laid out and maybe a little positive camber at full lift...
wow, didn't see that in the pics he has there... hahahahahaha why not run the bag above???
Originally posted by DATSLO
they are going to have some crazy ass camber!!!!
wtf? looks like next to no camber laid out and maybe a little positive camber at full lift...
wow, didn't see that in the pics he has there... hahahahahaha why not run the bag above???
gravity matt
+1y
Originally posted by dubrocker04
what's the wall thickness on the tubing? not too sure i'd want anything but DOM on such a vital component...
why, because the factory ones are made of such high quality dom as well
my buddy has a dirt track car and his arms that he got from a company everyone gets stuff from were made from black pipe with a threaded bung. and he has beat the shit out of this car for years. dom is good, but being that he using sqaure that is not an option. but it will hold up fine.
what's the wall thickness on the tubing? not too sure i'd want anything but DOM on such a vital component...
why, because the factory ones are made of such high quality dom as well
my buddy has a dirt track car and his arms that he got from a company everyone gets stuff from were made from black pipe with a threaded bung. and he has beat the shit out of this car for years. dom is good, but being that he using sqaure that is not an option. but it will hold up fine.
streetsweeper1
+1y
I
blazinlow89
+1y
Very well put. Most people will say something won't work because they haven't seen it before and not everyone has it, or because it is just something different. I think it looks good, and if it works then great. If it doesn't work....back to the drawing table
tofnlows10
+1y
those are sweet!!....used the same rod ends on my control arms and 4 link!..