K
rockers!!
time1
+1y
Edited: 4/10/2006 4:10:48 PM by TiMe_1
Originally posted by s10soolow
Originally posted by blazedbowtie82
Originally posted by TiMe_1
Originally posted by blazedbowtie82
Cut soem rockers off of another truck.
I say, cut the other rocker off, cap the rockers with some 1/4 inch plates, and........STOP BEING A SISSY AND MOVE THE CLUTCH MASTER AND THE BOOSTER!
Thats what I told him to do in the first place. Lol. And you could get away with a pretty small cowl laying door. Hell, some dude kept a stock hood in a newer Toy.
Moving the master clyninder/brake booster isn't even that hard. I have to move mine over 3 inches just to lay frame, so quit bitching.
I can relocate the brake booster just fine but where to put the clutch?
take the easy way out and pay $$$$ for a Wilwood setup for under the dash.
OR
Get creative and find a place to put it....thats what i did!
Originally posted by s10soolow
Originally posted by blazedbowtie82
Originally posted by TiMe_1
Originally posted by blazedbowtie82
Cut soem rockers off of another truck.
I say, cut the other rocker off, cap the rockers with some 1/4 inch plates, and........STOP BEING A SISSY AND MOVE THE CLUTCH MASTER AND THE BOOSTER!
Thats what I told him to do in the first place. Lol. And you could get away with a pretty small cowl laying door. Hell, some dude kept a stock hood in a newer Toy.
Moving the master clyninder/brake booster isn't even that hard. I have to move mine over 3 inches just to lay frame, so quit bitching.
I can relocate the brake booster just fine but where to put the clutch?
take the easy way out and pay $$$$ for a Wilwood setup for under the dash.
OR
Get creative and find a place to put it....thats what i did!
tenagator
+1y
^^^^^^^^^^^^^^^^^ me too what he said
s10soolow
+1y
How did u move it there?
drtbiker182
+1y
how do u unbodydrop a truck/?
s10soolow
+1y
Originally posted by drtbiker182
how do u unbodydrop a truck/?
In my case all u do is put new rockers on then put two pieses of 4*4 on the ground and then lay the truck on it and since my rockers are below the frame it will move back some when u cut the body drop apart!!
how do u unbodydrop a truck/?
In my case all u do is put new rockers on then put two pieses of 4*4 on the ground and then lay the truck on it and since my rockers are below the frame it will move back some when u cut the body drop apart!!
90yota
+1y
im in london and i have a newer bodydropped toyota....i moved the clutch cylinder up a few inches and put in a geo metro brake booster...both were not hard at all...and i work at a bodyshop here so i'll get you a price on some rockers
time1
+1y
Good luck!
TwistedMinis
+1y
Originally posted by TiMe_1
Good luck!
Do you have a picture of your pedal assembly Tim? Thats a good idea putting it by the frame.
Good luck!
Do you have a picture of your pedal assembly Tim? Thats a good idea putting it by the frame.
time1
+1y
Originally posted by blazedbowtie82
Originally posted by TiMe_1
Good luck!
Do you have a picture of your pedal assembly Tim? Thats a good idea putting it by the frame.
i do on my home computer. the whole pedal assy mounts to the floor and the master pokes thru the firewall next to the frame rail. ill post a pic when i get home tonigtht
Originally posted by TiMe_1
Good luck!
Do you have a picture of your pedal assembly Tim? Thats a good idea putting it by the frame.
i do on my home computer. the whole pedal assy mounts to the floor and the master pokes thru the firewall next to the frame rail. ill post a pic when i get home tonigtht
TwistedMinis
+1y
Awesome! That sounds easier than moving it up top, or recessing it. Cleaner too. I appreciate it Tim.