K
how to front fenders
truck action
+1y
Edited: 1/2/2006 11:10:04 AM by truck action
I should have tubed the firewall at the same time,may have to do it when the BYC a-arms go in!Did pull the torsion bars ,& set new inners 2 1/2 '' higher.
I should have tubed the firewall at the same time,may have to do it when the BYC a-arms go in!Did pull the torsion bars ,& set new inners 2 1/2 '' higher.
iceman9669
+1y
well i do plan on only layin 18" rims, one because its so much easier, and i don't plan on showing in the full blown out custom classes!!! but i will take this all under concideration when i bag it.
truck action
+1y
Edited: 1/2/2006 6:44:36 PM by truck action
I'm running 225/40/18's. Also will be installing the BYC a-arms I got,also Can Do's trans mount will be going in! My ride height is 4 1/2'' at the frame right now. I'm not planing a body drop, but it's real tight at the firewall now,so when bagged it will need to be tubed.
I'm running 225/40/18's. Also will be installing the BYC a-arms I got,also Can Do's trans mount will be going in! My ride height is 4 1/2'' at the frame right now. I'm not planing a body drop, but it's real tight at the firewall now,so when bagged it will need to be tubed.
buttmunch
+1y
i need to know if there is anything special i need to do besides remove my torsion bars and weld cups in to bag the front of my truck
iceman9669
+1y
make sure you test fit everything and then check for rubbing!! anyways thanks for MY information guys!!!! if there are anymore tips out there hit me up.