BYC for clientele and workers ONLY!

Edited: 3/10/2006 9:31:11 AM by hotrodcarey

well there was alot to be done yes and he did not charge me much. but i have learned good work aint cheap and cheap work aint good. the frame is done for, aaron at gasmonkey told me to buy a new front clip or build new frame with mustang II or sell it. he didnt tub the firewall.

yes the truck looks good from the outside, just the welds are horrible, anyone can tell you that really, that look 'alright" on the ouside of the rails, but the inside are horrible. id like to get 3900 or so. OBO. as sits now, has the 20's yes.

The z on that ranger looked horrible.

yeah he says otherwise

So did everyone start getting their parts or just give up posting?

well...he said mine where the oldest s10 order......here are the emails replies and whatnot.....STILL no parts! Notice the dates

>From: Michael White >To: Corey Honadel >Subject: Re: Control Arms>Date: Sat, 25 Feb 2006 13:16:08 -0800 (PST)>>I have finally made the S-10 balljoint sleeves. so ill be finishing yours as soon as i finish the Ranger stuff from last week.>> Mike BYC>>Corey Honadel wrote:> I would like to know what is all going on with the arms. It has been a week>with no response and I haven't been bashing or anything on SSM, so at least>could you keep my updated with this?>>> >From: Michael White> >To: Corey Honadel> >Subject: Re: Control Arms> >Date: Sat, 18 Feb 2006 07:30:36 -0800 (PST)> >> >yes, but yours have only to be finished, not completely built from scratch.> >so they will be first out.> >> > I actually worked on some S-10 uppers yesterday. I was finishing up the> >new jig for the S-10 uppers and tacked a set together in the jig to make> >sure they fit.> >> > so Im still planning on S-10 stuff all next week. I may put off doing> >fullsize and concentrate on S-10 only. I think I can actaually get> >everyones done in 2 weeks and make a few sets to sell.> >> > I will keep you posted.> >> > Mike BYC> >> >Corey Honadel wrote:> > Mike this is Corey, and i'm sure you know who I am. Just wondering when> >I> >can expect my arms. You said next week you'll start on the s10s and i am> >top of the list correct?> >> >Corey Honadel> >> >> >> >>>>>

well...he said mine where the oldest s10 order......here are the emails replies (that i DID luckily get) and whatnot.....STILL no parts! Notice the dates

>From: Michael White >To: Corey Honadel >Subject: Re: Control Arms>Date: Sat, 25 Feb 2006 13:16:08 -0800 (PST)>>I have finally made the S-10 balljoint sleeves. so ill be finishing yours as soon as i finish the Ranger stuff from last week.>> Mike BYC>>Corey Honadel wrote:> I would like to know what is all going on with the arms. It has been a week>with no response and I haven't been bashing or anything on SSM, so at least>could you keep my updated with this?>>> >From: Michael White> >To: Corey Honadel> >Subject: Re: Control Arms> >Date: Sat, 18 Feb 2006 07:30:36 -0800 (PST)> >> >yes, but yours have only to be finished, not completely built from scratch.> >so they will be first out.> >> > I actually worked on some S-10 uppers yesterday. I was finishing up the> >new jig for the S-10 uppers and tacked a set together in the jig to make> >sure they fit.> >> > so Im still planning on S-10 stuff all next week. I may put off doing> >fullsize and concentrate on S-10 only. I think I can actaually get> >everyones done in 2 weeks and make a few sets to sell.> >> > I will keep you posted.> >> > Mike BYC> >> >Corey Honadel wrote:> > Mike this is Corey, and i'm sure you know who I am. Just wondering when> >I> >can expect my arms. You said next week you'll start on the s10s and i am> >top of the list correct?> >> >Corey Honadel> >> >> >> >>>>>

Well i guess this forum has turned to be completely useless Mike has stopped posting on here and he surely hasnt answered any emails ive sent in 3 weeks he told me last that the balljoint issue was fixed on my arms and all he had to do was finish them. So Mike if you read this were is my parts that you said were next to build since ive got on of the oldest orders. If they are finished just ship them for god sakes donate some sperm to get the money or something

so here it goes I have an 87 toyota pickup in which I ordered BYC control arms from so I could eliminate my steering stabilizer bars weeks past tthen months bla bla bla .....I got bored and sick of the B.S. so I cut the stabilizer flipped sides reversed it put a Heim joint on the end of it and build some one off brackets and am ready to almost drive my truck . Will post pics soon . thanks for giving it to me with no anal lube mike . I didn't even get a reach around LOL

Mike, If you read this, please respond to my emails. I have sent you a few with no response and would like to know the status of my order.

Thanks, Richie

still haven't got my arms, yet every week I get the same reply, "I'm definently shipping out two orders this week and yours is definently one of them" I've heard that for about a month now but this week no reply. I'm sure it's just cause he's to busy, or maybe his dog died, or maybe he got a flat tire, or maybe his computer crashed and he lost all our info for 63rd time, whatever it is I'm sure he has an excuse.

Terry Stevens (ordered Nov. 30, 2004)