toyota 2wd bumper and valance on a 89 dime
291 views
3 replies
3 following
K
toyota 2wd bumper and valance on a 89 dime
rollin high
+1y
how hard is it to put this on.I have seen it done and was going to do it on mine.JBM doesn't sell anykind of bracket kit for this.Please feel free to chime in if you know anything about this.
rollin high
+1y
what all do you have to cut in order to make this work.
lumpy
+1y
to make this work you need to run 91-92 or 93 grille (one piece) the bottom of grille is trimmed off the L shape portion at the bottom
the frame horns need to be cut off or unbolted 90 and up made into frame 89 down bolt on
the fenders need to be cut at body line and rolled under
when cut right grille and fender will be even
also need combo brackets fbi sells them around 59
weld or bolt brackets up and align everything
the frame horns need to be cut off or unbolted 90 and up made into frame 89 down bolt on
the fenders need to be cut at body line and rolled under
when cut right grille and fender will be even
also need combo brackets fbi sells them around 59
weld or bolt brackets up and align everything