Airride Tech Big Red Valves, 2 6 gallons and a extreme outback engine driven compressor.
im gonna run...1/2 parkers1/2 lineyork 2108gallonslam bags 6's and 7'ssuicidedoors super lift 4linkkp dual and single needle gaugessquare d psi switch3 switches
ART ride pro valve (FBSS), shockwaves in rear, 2600's up front, 2 Thomas comps, 3 two gallon tanks, 1/4 lines (i like it slow and loud)
(4) 1/2" GC 250's "fills" (4) 3/8" GC 250's "dumps", York 210 belt driven compressor, 1/2 air line, firestone 2600lb bags all the way around, suicide doors 5 link rear settup, umm think thats it besides gauges and pressure and all that crap! Oh yeah no switch box! all buttons!!!
ENGINE DRIVEN COMPRESSOR FROM SUICIDEDOORS, 4 1/2 AND 4 3/8 AIR LIFE VALVES, 4 5 GALLON TANKS ALL RAN WITH STAINLESS STEEL BRAIDED PARKER LINE
8 gc 3/8 250 valves
4 2600 firestone bags
10 switch box
2 3 gallon tanks
2 firestone comps. (that suck ass)
in process of hardlining whole setup
4 EAI 3/8 manifold's
2 DC-5 3/4hp 100%duty
cycle@200psi
2 4 gallon tanks
full hardline
soon to add another DC-5 and a 1 5 gallon.
Edited: 11/1/2005 3:58:39 PM by Dupa102933
8 SMC 1/2" Valves 5/8" line 2 450 Viair Compressors and a 12 gallon tank 10 switches
two firestone bags up front, air shocks out back. two straight air lines with valve stems for switches,and to top it off the 12 volt tire pump from wal-mart, 2 1/2 min. for complete lift in the front!
Can-Do-Specialties 4-link
Air-Lift bags
(2) Viair 380Cs
(2) GC-Extreme 450s, 1/2" (lift)
(2) SMC, 3/8" (dump)
5 gallon tank
1/2" lines
2 switches
compressor cutoff switch
(2) Air-Lift gauges
shocks in the rear
Suicide-Doors brackets, notch, bridge, etc.
and it lays body.