RHD...

For those of you that have done RHD, what have you used for your steering?? stock steering box? one from a diff truck? etc?

thanks!

Use a rack from a rear steer fwd car... say a Dodge Omni for example, mount it on the front side (where your steering allready is)with the steering input on the passenger side, I saw it done this way and seemed easier than locating a rhd steering box...

Screw all that.. Just get a rack and pinion off of a car. Like a nissan sentra or something. If you have a nissan or isuzu it is possible to jsut move the box to teh other side.

you can flip the GM stearing pumps upside down, and it will work that way

Originally posted by toadfrog17



you can flip the GM stearing pumps upside down, and it will work that way

this idea sounds not to bad.... any particular steering pumps?

If you have a nissan use an s-10 manual steering box.If you have an s-10 use a nissan box. You need to do alittle machine work on the steering arm but it's easier than finding a rack ,adapting it,and eliminating bump steer. Just my opinion.

I have a mazda.

Edited: 9/15/2005 2:30:35 PM by iLLblazer

[begin retard voice and sparatic hand gestures] RaCk aNd pIniON [end retard voice and sparatic hand gestures]

if u havea s10 u can use the RHD stuff off a mail jeep. holes are already in the frame on the right side to...

you can use a tacoma steering rack, they are rear steer........