Need Crossmember. Experience Fabricator Only

hey daniel where you at in greenville?r you close to rmc autosales?will you sell anything out of your shop or internet only?sorry for getting off the topic

Originally posted by CustomParts



Originally posted by Low_SST



^ you need to change your sig

And whys that????



Either because you advertise "anything custom" and are asking for a custom part, or because its really really big.

I do advertise "anything custom" but I do not have the means to totally fabricate the part myself. I sell custom parts. Most of which are made by other companys. Very few items do I make inhouse but there is a few.

Hey Josh,

Yeah I do sales here in greeneville. What are you looking for? Hit me up at danielj@customparts.biz

message me if u run out of luck with the posts above..can build one for u dom/chromo/mild...whutever u want mig or tig

Here's the crossmember I got. It just is too low for me to lay out. It is 1/8 too low. Be something nice for someone with a static drop.

http://www.streetsourcemag.com/classifieds/XcCPViewItem.asp?ID=5616

give us more details, what kinda engine? how far is the engine off the ground??

we own a steel fab shop and we can build almost anythng ill do it for u if u give a drawing of what u want and all the measurements i am not saying im gonna design it just build your design if thats what ur looking for ill do it anytime

Originally posted by CustomParts



Originally posted by Low_SST



^ you need to change your sig

And whys that????



because its a big as ad and i get enough of that shit in truckin

Hey bro, you resize yours and I will resize mine. DEAL?


The motor is a 5.0/302. You can see pics in my profile. I had to remove the factory crossmember in order to get this engine in. The bottom of the oilpan is about 1/16 from the ground when layed out which should be about 1/16th from the bottom of the factory crossmember. the oil pan has a hump in it which clears the steering arm but not enough to clear the crossmember. I will get you all some detailed pics tomm.

ha... that's the ultimate customs crossmember i spoke so much about in other threads but mine hung 3/4" too low.
i still have it sitting here as junk.
if your iol pan is gonna be 1/16 " off the ground i'd hate to see a pebble get caught under there when your draggin'.