Please post pics of bent frames

470 views
25 replies
24 following
K
Please post pics of bent frames
hopsing avatar
hopsing
+1y
Holy crap!! That was before the guy even drove it?! That could of been so bad if he actually would have driven it down the street. Hope he is better than that now.
Ih8bmps avatar
Ih8bmps
+1y
Originally posted by mastercraftmini



there should be an application procees for buying welders and torches

NICE!!!I agree with my man!!! This is why i think the built not bought shit is retarded,cause theres alot of dudes out there that have never even changed a tire, yet seem to think they can weld like a master,just spend the money before you kill yourself or even worse kill me ...
aftermathdragr avatar
aftermathdragr
+1y
not bent but i did drag through mine
Car Nutz avatar
Car Nutz
+1y
HOLY SHIT!!! That is kick ass!!! Those Mcnotches are only tacked together, I would bet he "welded" the notch to the undercoat cause you know he didn't clean it first, that monoleaf above the axel is friggin sweet.
dubbed98 avatar
dubbed98
+1y
How do the bolt on kits do now days ?
opie90 avatar
opie90
+1y
I can see if I can cath a couple o guys what I know have on from bag setups one thing to look for though is the frame rolling outward(if bags mounted inside of frame) you can also cross measure from the pin holes under it. most frames will have measuring points (ex. FL to RR should be the same distance as FR to RL wich checks for squareness they can be off a lil from frame flex though)

Kyle - Man thas some sad sh**. I would be embaresed to have done that. I admit some of my stuff is not the pretties my welds the puddle tends to run a lil on me and I need to speed up but damn that it not even hardly welded much less assembled right. (no mean to dog anyone as long as the owner did it and didn't pay for it)
mtm avatar
mtm
+1y
Originally posted by dubbed98



How do the bolt on kits do now days ?

yea really. I'm taking a welding class when i go back to college in 2 weeks...it's not even required with what i'm doing, I'm just taking it so i know wtf i'm doing and know that i wont run into anything like that when i dive into my suspension this winter. Maybe i should see if there are any more openings and get some of these kids in there to learn a thing or two before they kill somebody with these hacks
ngacleetus avatar
ngacleetus
+1y
that cracks me up.. . and those welds don't look like they penetrated very good on the bag brackets or the brackets on the axle. . .at least he was not able to drive it. . .
dk dayton avatar
dk dayton
+1y
hahahahahahhahahahahahahahahahahahahahahhahahahahahhahahaha
bdroppeddak avatar
bdroppeddak
+1y
whats the kicker is how much time he spent painting the brackets and the monoleaf