how to lay frame in box s10

I cut mine all the way around the outside of the spring pocket

OK THANKS DUDE THATS WHAT I NEEDED TO KNOW BY THE WAY BAD ASS TRUCK!

ok, i got a question about my old body style s-10, i cut my frame out and lifted it up and its not hittin no where but it still aint layin out, anyone know why this is happenin? i have spindles also

check the length of your bag cups to see if they are short enuf to let the bag compress low enuf

that or the balljoint might be binding

well i know that my lower bag cup is short but the upper one is like twice the size, could that be the problem?

i opted to notch my lower arms rather then cut out a bunch more frame. its pretty easy. just make sure you plate them back up!!

i did that, im not hittin at all, i can stick my fingers between my frame and my control arm, thats not my problem

Edited: 8/4/2005 8:19:13 PM by cruisinlowS10

Damen.... it may possibly be the back of the lower control arm binding on the frame. I had to trim my frame a hair right where the arm bolts to the frame. basically it was the pivot area of the LCA bound on the frame before the truck laid out. otherwise your upper cup might be too tall.

thanks bro, i appriciate it alot i am gonna look into this, anymore suggestions would be helpful