how to lay frame in box s10

Originally posted by 2low91



i have cut the cups 1.5 in it has 2" spindles. the lower control arm is hiting the frame

Then you have to buy some that won't hit... or just cut the stock ones if money is an issue.

What size wheels are you putting on this thing, I take it they're bigger than 18's

will tubulra control arms correct this problem

they are 16x8 camaro wheels off a 92-93 camarp

You can get a set of tube arms from BYC, they'll stop your problem

are they verry expensive
do i need just lowers or lowers and uppers to

you should lay with just the lowers, or just cut and replate the stock lowers, it's pretty easy

THAT WONT WEAKIN THE ARM WILL IT IF I COT IT

You need to trim about 1" off the frame were it is hitting the lower control arm. That should lay your frame with no problem and keep you from rubbing holes in your bags. Thats all i did to mine to lay frame on 20's with stock control arms. I hope that helps.

OK SO I JUST NEED TO CUT THE FRAME JUST WHERE IT HITS OR DO I NEED TO CUT ALL THE WAY AROUND THE ARM