FRONT END REDO 93 YOTA

probably the dude at the parts store didnt known what he was saying then,,, i asked he said just looked like a ball joint no other hardware like the metal bracket,,, Im going sunday to look for myself so THANKS AGAIN GUYS

No they have 3 holes in them. I can get a picture if you want. I think I might even have an old picture with one in it.

YEAH I TOOK my lazy self onto auto zones website and found one...MAKING GOOD progress too

On the upper a arm would it be easier to get a link for the steering rod or just notch out a arm and reinforce it to go up where it would normally hit?

also flip ball joints to top?

bag placement parallel when layed or at ride height?

and would you smart dudes know what a 18 inch rim with a good tire would measure out to be height wise. .Mainly cause im trying to plan for future install of rims since in college full time havent had the money to buy them yet...
WILL post pics very soon THANKS AGAIN for real you guys hook it up with answers about everthing..

IF you need any tips on anything from fiberglassing mobile audio/visual mor alarm how to let me know i can help you out!!!

An 18" tire will be between 24.25" and 24.5" tall.

As for bag placement just make sure they dont pinch when layed out . so that usally means angeling the upper mount so that its somewhat parallel to the LCA when layed.

Just try to keep the bag mounts as low as possible, either by moddding the LCA or notching the frame a lil to get that Upper bag mount lower so you can get max lift after the 18's.
But ask what others did.
Or just build or buy tubular uppers ...Yea thats it.