K
engine swap
tooler12
+1y
Hey Friends,
Is there any other block that will bolt up to 1988 b2600 4x4 with 5 speed?
Everything is sweet EXCEPT (you guessed it) the head is cracked. It carb carb. I need something that will bolt right up to the tranny ect. Thanks People Toolup
Is there any other block that will bolt up to 1988 b2600 4x4 with 5 speed?
Everything is sweet EXCEPT (you guessed it) the head is cracked. It carb carb. I need something that will bolt right up to the tranny ect. Thanks People Toolup
neptune
+1y
the b2600 is mitsubishi so the other mazda engines wont bolt up sorry. and i dont know what mitsubishi cars/trucks have the engine either... someone might just wait for the answer lol
good luck
good luck
elbine69
+1y
D50's and starions have that same motor and will bolt up. Why not just replace the head?
madlowmazda
+1y
You could obtain a bongo bell housing from canada that bolts to your type 3 trans gear box- then you could have an F-block bellhousing which would allow you to install a real motor like a b2200 f2, an FE3, or an FE, or and F2t