PCV Valve With Weber Question
3639 views
15 replies
8 following
K
PCV Valve With Weber Question
xulf13
+1y
It doesn't matter, if it's L shaped even if it comes out from the top or the side, of course the L shaped one is the appropiate one for the top pcv hole kind.
If I was you I would get a new hoe and a new PCV valve anyways . It shouldn't cost you more than $6.00 and call it a day.
If I was you I would get a new hoe and a new PCV valve anyways . It shouldn't cost you more than $6.00 and call it a day.
pjsbird
+1y
"If I was you I would get a new hoe and a new PCV valve anyways "
what would i need a new hoe for? lol
what would i need a new hoe for? lol
hocbj23
+1y
to play with ur new valve.Lol.BJ
xulf13
+1y
Daaaang, lol. i meant HOSE and PCV valve, while at it pick up the PCV valve Grommet. lol
pont
+1y
that done alot to help to my motor.
Cusser
+1y
If this helps: my original Weber kit came with a plastic fitting which pointed down, so I used a 90 degree plumbing fitting with a real short hose to get it routed horizontal so I could attach the PCV hose. Two years later (I heard the kits had been changed as well) I bought a taller air filter assembly for like $15 at Arizona's BAP, partly because it had a 90 degree elbow as part of the kit, and used that.