K
20x9, will they fit?
layingframe89
+1y
read the rest of the post they will fit but with a 4 inch drop in the front they wont
baha
+1y
Sorry Josh I thought you knew he was body dropped and alot lower then 3or4 inches my bad man so why won't they fit a truck that is lower then 3or4 inches then.
layingframe89
+1y
because they will hit the heater box if bagged and if removed then u have to notch the i beams to lay and also make a new pit man arm. and the engine cradle has to be modified. other tahn that if a gen II truck is static dropped then it will be well in the fenders with more than 4 inches . and wont be able to turn i dont know if james knows or not but i think that it is pretty hard to pull a 20 inch wheel out of the fenders on a Gen II with i beams
bilt2drag
+1y
they are going on an 88 ranger with 4 1/2 inch body drop. i think they are gonna hit the fender brace though.
layingframe89
+1y
hell u are prob right and them bein 9.5 wide dam but it would look tight
bilt2drag
+1y
they are on it. i have to shortn the rearend a little and flare the fenders in the front about an inch and a half