gas gauge not working
8209 views
11 replies
7 following
K
gas gauge not working
layedoutb2k (chase)
+1y
i had that same problem with both of my mazdas. i found a lot of built up gunk on the actual sending unit inside the tank. i cleaned it up and it fixed the problem like a lot of people have mentioned already.
hocbj23- he is talking about just switching the sending unit and not the fuel pump because the 2200 have a mechanical one on the motor. im not familiar with the 2600s but if the pump is mounted with the sending unit, there might be an issue with swapping them.
hocbj23- he is talking about just switching the sending unit and not the fuel pump because the 2200 have a mechanical one on the motor. im not familiar with the 2600s but if the pump is mounted with the sending unit, there might be an issue with swapping them.
crazymikey
+1y
yeah,my truck has over 200 000 original miles on it and it's 20 years old,so I don't doubt the crap build up.
I have a rebuilt sending unit in kermit,maybe I could swap that out. That was done in June.
Andrew...I only have standard cab beds. I have the one on kermit,and I have the burgundy one at Lance's. You have an ext cab though dont you?
I have a rebuilt sending unit in kermit,maybe I could swap that out. That was done in June.
Andrew...I only have standard cab beds. I have the one on kermit,and I have the burgundy one at Lance's. You have an ext cab though dont you?