Tranny question????¿¿¿¿!!!

lol i was gonna say... "you sure" haha thanks man

i took the four bolts out of the shifter and poured it in there.

is it easier that way?

i just pulled the boot up and theres anouther rubber boot under that and i pulled that up and then there was four bolts to take out and then the whole shifter will come out i poured in the fluid and put it all back together and it still shifts easily so i guess everything is fine. one thing to look out for though is at the bottom of the shifter there is a ball that fits into a socket in the trans. and this socket has a bushing in it make sure that thing doesn't fall into your trans. its not hard you'll see what i was talking about when you get it apart if you try it that way.

well if that nut is stuck on the side of the tranny it could be a pain to get off. since theres not much room. there lots of room in the cab to move around and most the time the bolts are not on to tight. I would say yes it is

i have a trans out of the truck if you need a pic of what i was talking about

nah im not gonna worry about thank for everyones help, im havin the truck towed i figure if its leaking as bad as it is, i dont wanna just add fluid to drive it and let it ge worse, so its gettin towed next week thanks everyone.

i think it may be your rear main seal bro

my rear seal? how so, its leaking from the front its dripping out the bell housing.

the rear seal of the motor not tranny. make sure its gear oil not motor oil.