needing help with paint

ok guys i got a paint problum and i need your help, me and my brothers have a small shop( just getting started) not really setup for paint yet but the car we are working on ended up needing it, got the car sprayed got the clear sprayed but now there is what looks like dust in the clear, tryed sanding it ... still there, are we going to have to sand it all down to color and reclear it?. i dont have any pics of the clear they didnt turn out

overspray? not being set up for paint, did you spray in a mock booth or in the open? did you water the floor down beforehand to minimize dust? try sanding a smaller area with higher grit paper, 1500-2000ish, to see if that helps because if it doesn't you're going to have to strip it back down, or selling it as a one of a kind paint job .

no,no and no...lol didnt do the water,could be dust,didnt thank of that, been trying 800 and thanking of going 600 to sand it off, but the more we sand the more it seems to stay there, it dont get better or worse

did u tack rag the vehicle?? when i spray i tack rag between each coat also gotta wet the floor down i leave the water running under the car while i spray also good exhaust fans

i asked he didnt wet the floor and the fan needs to be biger i thank....i thank its dust in it, going to have tosand the whole thing down anyway,he sanded to much in one spot and it has to be resprayed