IS THERE ANY WAY TO KEEP HEAT AND AC BODYDROPPED ON 20S

I NEED A BLOWER MOTOR THAT WILL WORK ON MY 89 MAZDA . I WANT TO KEEP AC AND HEAT BUT ITS BODYDROPPED ON 20S. DOES ANYONE HAVE ANYTHING THAT WILL WORK OR ANY IDEAS. 770-899-8846 EMAIL

From my knoweldge you will have to get an AC/HEAT setup that guys run in vintage vehicles/hot rods. Its a smaller standalone system that is more contained but wait for a more seasoned member to chime in.

You dont need to yell

yeah the rodder guys use remote set ups
ill see if i can find the heater one?

My Mazda is setup for 20's but I am running 18's and I am just going to cut the section of the a/c box out that is hitting my tubs and reshape it the same way as if your doing body work. No need to run all that vintage or other vehicle parts. Keep it all stock and that is how I am going to run mine. When I get to that point I will send photos to show you. Almost there.

if this guy did his bodydrop like i did mine, the stock heater core and such wont work, because the space between the floor and cowl is (x) inches shorter than stock. that's why i don't have heat or AC. i'll need to find one smaller or make one. i'm not worried about ac, but heat is nice on a cold day.

I got a 2.5" Body drop with 18`s,i could fit 20`s and i dont got heat or a/c but i want heat because its going to be a daily driver does anyone have pictures or any ideas of how they have heat in their truck

i stockfloored mine and had both stock ac and heat....all i did was lose the glove box,move the blower over reshape the tubes and reseal it( sorry no pics).....who needs the glovebox anyway

vintageautoairconditioning.com