K
spy pics
h2omelon(nick)
+1y
looks good just thought it was funny that its so much alike. the wishbone setup will be for sale soon. im getting ready to stock floor the truck and build a custom frame. when i do im going with a bag on bar setup.
crazymikey
+1y
sweet! Doesn't it feel good to be back and working on the truck again after so long?
madmazda
+1y
Looks good.
nytrdr24
+1y
thx man, preshate the props!
hopefully the spare energy suspension poly-bushings will show up today so i can put the axle in, and get the shock & sway bar mounts on the axle & truck, then a little paint on it, and should be good to go less plumbing of the fuel & brake lines!
nytrdr24
+1y
just thought i'd post up a few new "spy pics" for you guys...still have to get the bottom shock mounts cut and installed (directly under the sway bar mounts), and finish the painting, but other wise, this is the way it will be till i get some coilovers and a wishbone link setup for the rear....
immortal1 (linn)
+1y
Very nice! I definately like the swaybar setup. Can I ask what is off of? or is it made for the B2200's?
nytrdr24
+1y
thx for the compliment immortal!
they are made for the b2200's by belltech, they can be gotten off of the net, i think i gave @ $125 for the rear, and the same for the front.....they are a direct bolt in. i had to modify the mounts for the sway bar on the rear, it comes with 3" u-bolts which won't fit the rx-7 axle tubes, so when i took the old sway bar mounts off of the rx's axle, i just modified them to work with the new sway bar (improvise, adapt, & over come!)
they are made for the b2200's by belltech, they can be gotten off of the net, i think i gave @ $125 for the rear, and the same for the front.....they are a direct bolt in. i had to modify the mounts for the sway bar on the rear, it comes with 3" u-bolts which won't fit the rx-7 axle tubes, so when i took the old sway bar mounts off of the rx's axle, i just modified them to work with the new sway bar (improvise, adapt, & over come!)
hocbj23
+1y
Ive got the Belltech bars on my 2200 as well.They are a good piece of work.BJ
nytrdr24
+1y
well just an update, I finally got to work on the truck last weekend....
I got the axle shafts out of the rx-7 rear, and carried them, the rear disc, and the front hubs to be drilled to 5x4.5 pattern....I talked to the guy that is doing the drilling this morning, and he had the rear axles & disc done, and is working on the front hubs, so maybe this weekend, i can get the the axles back in, hubs on, and get it down off of the jacks on the new wheels....& if i can round up my bro & a couple friends get the bed set back on the frame......
I got the axle shafts out of the rx-7 rear, and carried them, the rear disc, and the front hubs to be drilled to 5x4.5 pattern....I talked to the guy that is doing the drilling this morning, and he had the rear axles & disc done, and is working on the front hubs, so maybe this weekend, i can get the the axles back in, hubs on, and get it down off of the jacks on the new wheels....& if i can round up my bro & a couple friends get the bed set back on the frame......
cid (dale)
+1y
Looks killer bro. This should turn out really nice. Definatley a nice balanced system with the 190 your going to be putting in it .
Dale
Dale