ok ive been searching to see if anyone has made their corner lights into blinkers.....i want to make mine go opposite of the real turn signals (u know, first signal and then corner) i havent been able to find anything
can someone lead me in the right direction....has anyone done this?
a few have there was a link along time ago sorry dont rememeber who's when i get time ill loook
it takes a single pole double throw relay to flop the lights back and forth. I've done it before give me some time to dig it up.
this way you don't change the bulb socket it just cuts power making it flash opposite of the blinker
can't you just splice it into the turning lights in the bumper?
bodied b2600zx (josh)
+1y
i wanna do this but with a dual filament bulb in the grille light, i was jus gonna have em blink together, this would be cool too though, especially if its easy
that is what i did BUT it flashes together with the turning light instead of what i want, which is opposite
ohhhhhhh.. okay, i get you now.
you will need two of these relays with 5 tabs to do this my way
okay take the hot wire on the corner light and cut it and put a spade connector on each side.
take the hot wire coming from the truck and connect it to terminal 30
now take the hot wire going to the corner and connect to terminal 87a
run a ground lead to terminal 86
splice the hot from the turn signal wire and connect to terminal 85
they will no blink opposite of each other