would slam re-7 bags fit all around?

I have put 7's in the almost 3 dozen mazdas I have built. Yes it does require a little more prep to get them to fit but the result is well worth it. I alsp have never had to notch the frame to make them fit. It takes 30 psi to lift my truck to ride height and rides bitchin. If I did this right here are some pics of my current cab plus. The extra plating is because I built thistruck to hop. Not in these pics are two gussets the were ran up the "A" arm mounts on either side of the bolt holes.

Got pics with the bag in there? Id like to see how much clearance there is around everything.

I'll have to take some new ones. If you run a Slam there will be about a 3/8in between the bag and the frame. You might be able to get the same result with a 4 ply Conti but I have never tried it.

That Red supercab is bitchin !!!

i wanna see some pics with the bag in there and i wanna see some side pics of the truck at full lift.





-justin

this is a pic of it hopping(before it the red paint) but you can see the amount of clearance between the tire and the fender. It is the same as when the truck is just aired all the way up. I could get about 1.5" more if I trimmed the upper "A" arm a little. I''ll get some pics of the bag tomarrow in the daylight.

keep in mind the truck is body dropped 2.5"

dude thats badass. and no rubbing or notching? if thats true i definetely am goin with a 7.





-justin

true as the red on your truck I'll get pics in the daylight......off topic....anyone going to Forbidden Fantasy on March 9

i wish i was going.....