Drop spindles?

I found that the camber isn't too bad on the front on 18s. You aren't going to be driving at full drop at all times, so thats only the real time the camber is at full angle.

okay with the 16" denali's you have to watch that you do not flip the ball joints with the drop spindle's as they will rub when turning also when I did Cid's truck I had to grind on the spindle abit to make they fit right so unlees you are for sure going 18 inch wheels down the road forget about the spindles and just work on modifing you control arms and flipping your ball joints.

cool, thanks much

I was told you can cut out a little triangle on the a arm and bend it down to meet with the other side of the triangle weld it and you can lay out on a 20. Is this true?

Youll need drop spindles for a 20. What your referring to is pie cutting the arm which reangles the upper balljoint so the balljoint isnt binding and holding you from laying out. Like it was said before this only works well up to an 18.