How is this welder

Ok. Well I sold my 302 today and possibly have my hot wheels sold...so that means I get to possibly get my welder for Christmas. Question to you fabricators in here is this welder ok to weld frame, body, and whatever else may need to be welded on a mazda? Here are the copied specs and the link

Clarke® 130EN Mig 110 Volt 130 Amp (No Gas or Gas) PKG #8 - 130EN Welder, Regulator, Mig Cart, Solar Auto Helmet & Cylinder
Clarke® 130EN Mig "PACKAGE - 8" Contains:
Clarke® 130EN 110 Volt 130 Amp (No Gas or Gas) Welder

WE6540 Regulator w/ Gauges

CC-MIG Industrial Welding Cart w/ handle - sold exclusively in packages from Weldingdepot!

Our #1 selling: SS2-0801 Solar Auto Darkening Helmet - sold exclusively in packages from Weldingdepot!

HP-20 Cylinder 20 cu ft Argon or Argon/Co2

High Quality for years of dependable service.

Solid state electronic heat control with large PC board for better wire speed control.
Weld steel, aluminum, stainless, copper and cast, requires correct wire and gas.
Operates from standard 110 VAC.
Automatic thermal safety switch prevents overload.
Mig Gun with full On / Off safety control.
Mig Gun is non-live with built in gas shut off.
Fan Cooled.
Complete with mig gun, ground lead, gas hose and starter spool of flux core wire.
Uses 2 lb. - 4" and 11 lb. - 8" spools - carbon steel, copper, stainless and nickel.
Uses 2 lb. - 4" and 11 lb. - 8" spools - flux core 71TGS.
Uses 1 lb. - 4" and 5 lb. - 8" spools - aluminum .030 5356.
Simple to operate and portable.


Weight: 54 lbs
Max Amps: 130
Min Amps: 28
Heat Settings: Four
Max Open-Circuit Voltage: 30
Variable wire feed control 0 - 540 IPM
On / Off switch
+ / - Polarity control.
Fan Cooled
Thermal Safety Switch
Wire sizes: .023 - .035
Circuit Breaker Recommended: 20 - 25 amps
Input voltage: 110 VAC
Phase: Single
Duty Cycle: 20% at 100% output
Max Metal Thickness: 3/16"
10/2 - Year Limited Welder Warranty

Specifications: CC-MIG Industrial Mig Cart
Specifications: SS2-0801 Solar Auto Darkening Helmet
Warranty Details










Please help!!!

Simple answer, no.

Ok. Not a good brand? Or just cheap and wont weld worth a damn. I was going to be using gas.? What about the 220W one that they have?

Anyone else? Sorry just trying to show my wife what I want for Christmas. She very seldomly actually pays attention to anything I show her online.

I would aim towards a Miller.

I would love to buy a miller but they are sooo expensive. Since I am so friggin lazy anybody have the details on a welder to buy? Also where to buy at? I would love to find a package deal like above.

I bagged my truck with the same welder. Just have to take your time with it. The 220w 180 is better though. If I had the money I would have got a miller matic though.

I use the lincoln 135 and it does the job With gas. I have used the miller 210 and love it. When i upgrade it will be a miller...big one The lincoln you can find on sale priced right. I use a certain plug in my shop 30 amp with 30 amp wire to my power panel (very short) and NO extention cord and works just fine. If i did it again i would go with the 220 one thow. I got it at home depot on sale!

I use a millermatic 130 with gas, I would love to step it up, But it does the job.

Ive got a lincoln 135 just like dirtracer14, I love it.. I went to a local welding shop and it was used for 1 semester at a local college of technology.. I got it with a cart, full bottle of gas, nozzle, wire, ready to weld for only $475.. Not a bad deal if you ask me,, maybe you can find a similar deal...

Heres the welder new on ebay/ no cart no bottle for 200 bucks more...