Swagger Build Thread : 99 f250 Super Duty

few pics of the bed in place... have to reposition the axle so its centered in the wheel well better but im soooo excited about how it looks

got the bed all lined up ... what a PITA that was alonethe passengers side mount is under the bed and tack welded in place

the body lines line up better now than they ever did





tomorrow ill finish the drivers side front one and fully make the rear supports once the rears are made and tacked into place ill be able to lift the truck and place the drivers side front one

then back down to work on the middle 4

finally got the 4 main bed mounts builtdid the front passengers side first by reaching it threw the stack hole in the bed

pic taken under the truck looking tword the cab after tacking in place

measured out the drivers side front but couldnt get under the truck to install itso on the the back first i built a cross member under the bed welded that to the bed floorthen the uprights were made and welded onto the frame

pic taken from under the truck looking out the tailgate

the i vice gripped the bed to the cab on the drivers front corner and aired it up

then the front drivers side got tacked into place

some random pics

me sitting where the fuel tank belongs welding the back two uprights in place

looking at the rear axle from the tailgate

high rider

some pics of it laid out

Bumper???

This beast ever make it back to life?