Need help from the backspace and offset guru's

centerline had a sweet deal going on not too long ago.

Edited: 7/16/2010 8:19:29 AM by KAOSS

You're better off now that you are 5 lug!

I'm not sure of any 5 lug wheels that will fit man.  I only keep my eye out for 6 lugs because I haven't converted yet.

Dont forget that if you are running spindles you loose about half an inch. At least that is what everyone I know who has done spindles on a dawg tells me. We might want to confirm that. 

Spindles do push the weel out a bit. At least they did on my truck.

Well I am running all stock components up front. I did find a set of dRiv Royale wheels 18x7.5 with a 5.90 backspace, close enough for me, I think I can make them work. 20x8.5 in the rear with +35mm offset, With the old toyota rearend I'm running I will have to narrow the backhalf 8" but I was doing that anyway. May go ahead and narrow the backhalf another 4" so I can run my fourlink on the outside of the rails. Thanks for the help with the backspace and offset confusion.