Slammy - Bulletside build

1433 views
24 replies
15 following
K
Slammy - Bulletside build
mjavy7 avatar
mjavy7
+1y
Any updates?
Slammy avatar
Slammy
+1y
Ill update once i get the headers going good. Stay tuned  
shavedmax avatar
shavedmax
+1y

looking good
Uncle Fester avatar
Uncle Fester
+1y

Love the work so far, cannot wait to see updates.
Slammy avatar
Slammy
+1y
Edited: 8/6/2010 7:50:18 PM by Slammy

    
post photo post photo post photo
Slammy avatar
Slammy
+1y
Edited: 8/16/2010 6:23:47 PM by Slammy

Before i get started on the drivers header i needed to know where the steering was going to actually be at so i jumped on that.

Factory these trucks have a one piece column/shaft that goes straight to the box like in the first pic. What i needed to do was convert it to where i could use ujoints in on a removable shaft like you would any other project. After some designing and  machine work i got a aluminium adapter for the factory box that holds a sealed bearing. Next is to cut and weld the splined shaft onto the stock shaft once the parts get in. Then ill be laying out the rest of the steering.

Stay tunered! 
post photo post photo post photo
jeebus @ mmw avatar
jeebus @ mmw
+1y
You really are one of the greats man.  I enjoy every project i see from you. Really nice clean work.  You allways have your welder dialed in Perfect!  whats up with the ball screw?   Taylor
bigperm avatar
bigperm
+1y


damn you sammy!!! with all your "machined" parts and what-not...          stuff looks killer as usual, man.      
Slammy avatar
Slammy
+1y
--------------------------------------------- Originally posted by Chopped Mazda You really are one of the greats man.  I enjoy every project i see from you.   Really nice clean work.  You allways have your welder dialed in Perfect!     whats up with the ball screw?       Taylor ---------------------------------------------   Thanks! Thats just how it is factory man, i only messed with what i needed to 
nvr53 avatar
nvr53
+1y

badass