help with hard line and fittings

5242 views
19 replies
17 following
K
help with hard line and fittings
lo4lyf1 avatar
lo4lyf1
+1y

i checked hydroholics.net and all there fittings were brass. where do i buy the norgen nickel ptc fittings? i really want to try and stay with ptc and either stainless or nickel plated.
bodydropped avatar
bodydropped
+1y
ekstensive sells the fittings you should need
AON-OFFDAHOOK avatar
AON-OFFDAHOOK
+1y


---------------------------------------------Originally posted by lo4lyf1i checked hydroholics.net and all there fittings were brass. where do i buy the norgen nickel ptc fittings? i really want to try and stay with ptc and either stainless or nickel plated.---------------------------------------------For the record....NONE of our fittings are brass.  They are all steel used for industrial applications with the utmost tightest tolerances. Most of our fittings are nickel plated with just a few zinc plated.     
lo4lyf1 avatar
lo4lyf1
+1y

didnt mean to offend. they just look brass in the pictures on the site. you want to get me some prices on 1/8, 1/4, and 3/8  male pipe thread to 3/8 ptc line fittings in nickle plated?
nc dragger avatar
nc dragger
+1y

Has any onr hard line the compessors to the tank and if so what line did you use?
DOWNSUB avatar
DOWNSUB
+1y
If you got the $$$ get Swagelok fitting's all SS look bad azz !!!    

http://img.directindustry.com/images_di/photo-g/pipe-fitting-59761.jpg
unusualfabrication avatar
unusualfabrication
+1y
I can get stainless steel compression fittings. They are not polished though. That's what I used on my truck with 3/8 stainless steel line. Had it on for 7-8 years without a leak or other problem.
tacomaon24s avatar
tacomaon24s
+1y

i am using all swagelok stainless steel with reusable compression. and 1/2 id stainless steel hardline for all my fuel line pressure and return. also i am using 1/2 id stainless line and swagelok fittings for my hydraulics
CommonVan avatar
CommonVan
+1y

CommonVan avatar
CommonVan
+1y
at chaotic in houston we use the norgren pushlock fittings with alluminun fuel line with no problems