colorado wheels?

im lookn to get some 20s for my crew cab and i was wondering what a good offset/ and width would be, so they will tuck later when i bag n b/d it?

what you need is a really high offset.   like a 30 or 35.  if i remember right mine are 20 x 8.5  and a 32 offset.   also have a 245 35 20 tire.  djm 3/4 drop.  only rubbage i get is when turning to the right, mine rub the sway bar.

please also be aware that most off the shelf wheels will not fit due to the size of the hub, most off the shelf wheels have a hub bore of 3 inches, while the colorado is 100mm in other words 4 inches, also even if you get a wheel that fits offest wise when you bag and body it you will probably have to shorten the rear end, even if its a small margin like an inch, these axles are wiiiiiide hope it helps!

here is where you need to go for all your info.    http://forum.355nation.net/ 

Yeah, that site is full of that kind of information.  I know that you can pull the body mounts in the bed a bit to get more clearance in the rear without having to shorten the axle. Can't remember what his offset was on the wheels though...