cam for 305
societyoutkast
+1y
societyoutkast
+1y
dang it had the info the part number is 90350 and yes it has lifters
tuckinlugs06
+1y
i got a question when you buy a cam can it be changed without teardown the motor...or can it be slid in the same way one it pulled out with out pulling the lifters
rat_fink
+1y
i got an 88 ranger that you can use for spare parts bro.
02ramon20s
+1y
no, you will have to remove the lifters to pull out the camshaft. if not the cam will catch the lifters. If this is a Hyd. Flat tappet camshaft, i hope it is new and never been run. If not you take a chance at wiping a lobe out.