K
Rear Battery Box/Tray
ALL 20S
+1y
Edited: 12/21/2008 2:16:54 PM by ALL 20S
Edited: 12/21/2008 2:14:51 PM by ALL 20S
All clean setups, but I like "nissandoordragger" because he put vent holes in the bottom just in case water gets in there. I used angle iron on both my batteries in the back, clean and simple! Also to get a better ground use a "star" washer when you ground to the frame, will work great!
Tacked on w/out gussets
Edited: 12/21/2008 2:14:51 PM by ALL 20S
All clean setups, but I like "nissandoordragger" because he put vent holes in the bottom just in case water gets in there. I used angle iron on both my batteries in the back, clean and simple! Also to get a better ground use a "star" washer when you ground to the frame, will work great!
Tacked on w/out gussets
unusualfabrication
+1y
I run all my grounds to the battery for the best connections. This is the best way especially if you are running a high performance ignition system like a MSD like myself. You can save yourself a lot of headache chasing down eletrical gremlins.