L
hydros on the front of an s10
L
lomofo85730
+1y
does anyone have any pics of how they did theirs? like what size cylinders, what coils, uniballs, hiems, etc etc.
blazed22s
+1y
Edited: 12/27/2008 12:13:32 PM by Blazed22s
i dont have any pics of mine yet, but im planning on running 8" cylinders with these coils i got from a friend who had them on his dro'd s-10. im going to have the coil over the cylinder, so that the cylinder isnt stickin up very far. also going to run some powerballs on the lower control arms (after market tublars)
i dont have any pics of mine yet, but im planning on running 8" cylinders with these coils i got from a friend who had them on his dro'd s-10. im going to have the coil over the cylinder, so that the cylinder isnt stickin up very far. also going to run some powerballs on the lower control arms (after market tublars)
jeebus @ mmw
+1y
There are alot of pics in any of my S-10 profiles.
i used 6" cylinders, with .5ton minicoils cut in half, and accumulators. I normally just use a coilover stup up front, with a powerball on the arm, or a heim with tabs.
Taylor
i used 6" cylinders, with .5ton minicoils cut in half, and accumulators. I normally just use a coilover stup up front, with a powerball on the arm, or a heim with tabs.
Taylor
L
lomofo85730
+1y
cool thanks i was gonna run mini coils with 6in cylinders and accumulators. i jus wanted to make sure it was gonna lock wit 6" in the front. will i have a problem if the frame is eyebrowed for bags