air bags

206 views
7 replies
6 following
K
air bags
customforlife avatar
customforlife
+1y
ok i have an 98 single cab chevy trucki got the air bag cups for the front and they dont have any bolts welded on them or anything.how would i go about mounting them in place?
simple-pleasurez avatar
simple-pleasurez
+1y
you need to have a bolt welded in the top cup.
customforlife avatar
customforlife
+1y
ok so what about the bottom one
alwaysLow101 avatar
alwaysLow101
+1y
top has one long bolt to go through the hole where the shock bolts, and the bottom have to on them, they go through the holes where the shock is bolted in between the coil spring on the lower control arm
customforlife avatar
customforlife
+1y
ok that makes sense thanks
alwaysLow101 avatar
alwaysLow101
+1y
No problem
Balzout Sparkin avatar
Balzout Sparkin
+1y
The lowers don't necessarily have to have bolts, it will just sit in place. OR, you could just plate the lower arm and bolt the bag straight to the plate.
bodydropped avatar
bodydropped
+1y
most lowers float aka just sit there so if you jack your truck up it wont hurt the bag as much as it being bolted with no limit straps, if its bolted it can stretch the bag so much it could tear it internally or externally